int led0_Pin = 0;
int led1_Pin = 1;
int led2_Pin = 2;
int led3_Pin = 3;
int led4_Pin = 4;
int button0_Pin = 8;
int button1_Pin = 9;
int button2_Pin = 10;
int button3_Pin = 11;
int button4_Pin = 12;
void setup()
{
  pinMode(led0_Pin, OUTPUT);
  pinMode(led1_Pin, OUTPUT);
  pinMode(led2_Pin, OUTPUT);
  pinMode(led3_Pin, OUTPUT);
  pinMode(led4_Pin, OUTPUT);
  pinMode(button0_Pin, INPUT);
  pinMode(button1_Pin, INPUT);
  pinMode(button2_Pin, INPUT);
  pinMode(button3_Pin. INPUT);
  pinMode(button4_Pin, INPUT);
}
void loop() 
{
  if (digitalRead(button0_Pin) == LOW)
  {
    digitalWrite(led0_Pin, HIGH);
  }
  else digitalWrite(led0_Pin, LOW);
  if (digitalRead(button1_Pin) == LOW)
  {
    digitalWrite(led1_Pin, HIGH);
  }
  else digitalWrite(led1_Pin, LOW);
  if (digitalRead(button2_Pin) == LOW)
  {
    digitalWrite(led2_Pin, HIGH);
  }
  else digitalWrite(led2_Pin, LOW);
  if (digitalRead(button3_Pin) ==LOW)
  {
    digitalWrite(led3_Pin, HIGH);
  }
  else digitalWrite(led3_Pin, LOW);
  if (digitalRead(button4_Pin) == LOW)
  {
    digitalWrite(led4_Pin, HIGH);
  }
  else digitalWrite(led4_Pin, LOW);
}

문제 확인 부탁드립니다.

계속 이런 오류 때문에

exit status 1
보드 Arduino/Genuino Uno 컴파일 에러.

참고로 버전은 1.8.3 입니다