아두이노:1.6.7 (Windows 7), 보드:"Arduino/Genuino Uno"

스케치는 프로그램 저장 공간 (14%) 중 4,700 바이트를 사용. 최대 32,256 바이트.
전역 변수는 (10%)의 동적 메모리중 208바이트를 사용, 1,840바이트의 지역변수가 남은. 최대는 2,048 바이트.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0a
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x0a
보드에 업로딩중에 문제 발생. 다음을  참고하세요. http://www.arduino.cc/en/Guide/Troubleshooting#upload

  이 리포트는 많은 정보를 포함합니다
  "컴파일하는 동안 상세 출력 보이기"
  파일 > 설정에 사용가능하게 됨

이런오류가 떳습니다.ㅠㅠ 어떻게 하면 될까요?~